Precautions - iFootage Shark Slider Nano Instruction Manual

PRECAUTIONS

1. Prior to opening the App please ensure that your Smartphone's Bluetooth is
activated. If using an Android device please ensure that the Smartphone's GPS is
activated.
2. It is recommended to use only F750 batteries.
3. As a result of lithium battery discharge characteristics and the overall power
requirements for the Shark Slider Nano to operate, should the battery power be
20% or less, the operation time may be reduced to less than 10 minutes. Please
ensure the battery is fully charged so that there is su cient power for sustained
operation. When battery power is low, it is possible to switch to a USB power
supply which will also recharge the battery in addition to powering the unit.
4. The output current for the charging power adapter should be above 2A in order to
charge e ectively.
5. Once activated,the Nano automatically moves to the initial status/zero
point.Please ensure that the track is clear of obstacles prior to starting. It is
recommended that users keep their hands clear of the tracks to avoid damage or
injury.
6. Always protect the equipment when working in dusty, damp or wet environments.
Failure to ensure adequate protection from elements may result in equipment
failure.
7. Do not use this motion control unit in environments above 65°C and below -25°C
degrees.
8. Any disassembly or modi cation without authorization or improper use of the
equipment may result in damage and a ect the warranty.
9. In order to operate the Nano via the iFootage Moco App please follow the
download instructions below:
IOS users: search "iFootage Moco" /"iFootage" in the Apple App Store and then
download, or scan the QR code on the following pages to download the app.
Android users: search "iFootage Moco" /"iFootage" in the Andriod App Store and
then download, or scan the QR code on the following pages to download the app.
– 25 –
- 03 -