iFootage Shark Slider Nano Instruction Manual page 31

INSTALLATION GUIDE AND FUNCTIONS
Start up
Step 1: Please follow the procedure below.
1
On/Off switch
To turn on, please press and hold the 'ON' switch for 3 seconds
until the boot animation appears.
2
Prior to attaching any equipment, level
the slider and await the 'dynamic
calibration process' to indicate 100%.
Avoid any contact with the slider
during this procedure.
Note: Auto calibration takes place after each restart.
3
Install the device and place the camera
lens perpendicular to the track. After
the setting is completed, press
"calibrated" to confirm before normal
use.
– 31 –
- 0 9-