Icom IC-208H Adjustment Procedure page 12

SOFTWARE ADJUSTMENT-Continued
ADJUSTMENT
TEMP. 1 • Operating frequency
• Receiving
CORRECTION
<High power>
(UHF –10˚C)
[HP–]
(UHF +60˚C) 2 • Operating frequency
• Receiving
[HP–]
<Mid. power> 3 • Operating frequency
• Receiving
(UHF –10˚C)
[MP–]
(UHF +60˚C) 4 • Operating frequency
[MP–] • Receiving
<Low power> 5 • Operating frequency
(UHF –10˚C) • Receiving
[LP–]
(UHF +60˚C) 6 • Operating frequency
• Receiving
[LP–]
PROTECT 1 • Operating frequency
• Receiving
SCALE
(VHF)
[PM]
(UHF) 2 • Operating frequency
[PM] • Receiving
PROTECT 1 • Operating frequency
POWER • Receiving
(VHF)
[PP]
(UHF) 2 • Operating frequency
[PP] • Receiving
ADJUSTMENT CONDITION
: 445.0 MHz
: 445.0 MHz
: 445.0 MHz
: 445.0 MHz
: 445.0 MHz
: 445.0 MHz
: 146.0 MHz
: 445.0 MHz
: 146.0 MHz
: 445.0 MHz
•Turn the [DIAL] to set to "F9" on the display.
• Push the [BAND] key.
•Turn the [DIAL] to set to "07" on the display.
• Push the [BAND] key.
•Turn the [DIAL] to set to "00" on the display.
• Push the [BAND] key.
•Turn the [DIAL] to set to "00" on the display.
• Push the [BAND] key.
•Turn the [DIAL] to set to "00" on the display.
• Push the [BAND] key.
•Turn the [DIAL] to set to "00" on the display.
• Push the [BAND] key.
•Turn the [DIAL] to set to 130 % on the display.
• Push the [BAND] key.
•Turn the [DIAL] to set to 140 % on the display.
• Push the [BAND] key.
•Turn the [DIAL] to set to 5 W on the display.
• Push the [BAND] key.
•Turn the [DIAL] to set to 5 W on the display.
• Push the [BAND] key.
11
OPERATION