ABB ACS880-07 User Manual page 34

34 Start-up and validation test
Action
Deactivate the POUS function: set the POUS switch to the closed position.
Note: If the POUS function is in the automatic reset mode, the drive can restart automatically when you
deactivate the POUS function.
Make sure that the POUS indication lamp goes off and the related warning is no longer shown.
Restart the drive and make sure that the drive and the motor operate normally.
Save the FSO safety file with the button Save safety file in the Drive composer pro PC tool.
Fill in and sign the validation test report. Store the report in the logbook of the machine.