3.4.2 Configuration Save and Restore
You can save system configuration settings to a file, and later download it back
to the 802.11A/G ACCESS POINT by following the steps.
Step 1. Select from the System Tools menu.
Step 2. Enter the path of the configuration file to save-to/restore-from (or click
the Browse button to locate the configuration file). Then click the
SAVE TO FILE button to save the current configuration into the
specified file, or click the RESTORE FROM FILE button to restore the
system configuration from the specified file.
3.4.3 Factory Default
You can reset the configuration of your 802.11A/G ACCESS POINT to the
factory default settings. To do it:
Step 1. Select Factory Default from the System Tools menu.
Step 2. Click YES to go ahead and restore the configuration to the factory
default.
72