Table of Contents
Advertisement
in Radius protocol messages. The shared secret configured in the 802.11A/G
ACCESS POINT must match the shared secret configured in the RADIUS
server. The shared secret can contain up to 64 alphanumeric characters.
RADIUS Server Reattempt Period: The number of times the 802.11A/G
ACCESS POINT should attempt to contact the primary server before giving up
Enter the information for a second RADIUS server in case that there are 2 on
your network which you are using authenticate wireless clients.
-DHCP Server Settings
DHCP stands for Dynamic Host Configuration Protocol. The DHCP server
dynamically assigns IP addresses (from a pre-defined list) to clients when they
log on. The client will request a new IP when the specific period of time is about
to run out. If it expires, the address is returned to the pool of IP addresses.
Select the check box of "Enable DHCP Server" to enable DHCP server
function.
The range of Clients' IP addresses range from 192.168.1.2 to 192.168.1.254.
You can assign an IP address to a specified MAC address.
63
Advertisement
Table of Contents
