Table of Contents
Advertisement
2
This section describes the installation procedure for the 802.11A/G ACCESS
POINT. It starts with a summary of the content of the package you have
purchased, followed by steps of how to power up and connect the 802.11A/G
ACCESS POINT. Finally, this section explains how to configure a Windows PC
to communicate with the 802.11A/G ACCESS POINT.
2.1 What's in the box?
The 802.11A/G ACCESS POINT package contains the following items:
One 802.11A/G ACCESS POINT
One 5V DC power adapter with a barrel connector
One CD of the 802.11A/G ACCESS POINT User Guide
2.2 Connect the cables
The Back Panel of the 802.11A/G ACCESS POINT appears as follows:
Follow these steps to install your 802.11A/G ACCESS POINT:
Step 1. Connect a LAN hub to the LAN port on the 802.11A/G ACCESS
POINT using the supplied LAN cable.
Step 2. Connect the power adapter to an electrical outlet and the 802.11A/G
ACCESS POINT.
Install the 802.11 A/G
2.
Access Point
RESET
POWER
13
LAN
Advertisement
Table of Contents
