Table of Contents
Advertisement
with a default of 2347. It is recommended that this value does not deviate from
the default too much.
Fragmentation: When the size of a unicast frame exceeds the fragmentation
threshold, it will be fragmented before the transmission. It should have a value
of 256-2346 bytes, with a default of 2346. If you experience a high packet error
rate, you should slightly decrease the Fragmentation Threshold.
Transmit Power: Transmit power output depends upon the size and RF
characteristics because that will determine the number of APs, channels, and
need for antennas.
AckTimeOut (11a)/ (11g)/ (Turbo-11g): The "AckTimeOut" determines how
long the program waits after receiving a packet from a file stream to determine
that stream to be a complete file.
-DHCP Server Settings
DHCP stands for Dynamic Host Configuration Protocol. The DHCP server
dynamically assigns IP addresses (from a pre-defined list) to clients when they
log on. The client will request a new IP when the specific period of time is about
to run out. If it expires, the address is returned to the pool of IP addresses.
47
Advertisement
Table of Contents
