Table of Contents
Advertisement
-Wireless Settings
RTS Threshold: RTS/CTS frames are used to gain control of the medium for
transmission. Any unicast (data or control) frames larger than specified RTS
threshold must be transmitted following the RTS/CTS handshake exchange
mechanism. The RTS threshold should have a value between 256-2347 bytes,
with a default of 2347. It is recommended that this value does not deviate from
the default too much.
Fragmentation: When the size of a unicast frame exceeds the fragmentation
threshold, it will be fragmented before the transmission. It should have a value
of 256-2346 bytes, with a default of 2346. If you experience a high packet error
rate, you should slightly decrease the Fragmentation Threshold.
Transmit Power: Transmit power output depends upon the size and RF
characteristics because that will determine the number of APs, channels, and
need for antennas.
AckTimeOut (11a)/ (11g)/ (Turbo-11g): The "AckTimeOut" determines how
long the program waits after receiving a packet from a file stream to determine
that stream to be a complete file.
42
Advertisement
Table of Contents
