Icom IC-706MKII Manual page 14

KB2LJJ Radio Mods Database
5. Locate the SMD resistor R325 and unsolder it. Solder in the approximately 1.0 k ohm type.
6. Reassemble the main unit.
7. A reset of the radio is not necessary.
8. Don`t forget to set your personal mic amp level in the initial setup (menue Q2).
Remarks:
Although I modified my own IC 706 MK II without any problems I certainly will not be responsible for any damage of your radio
following this modification description. You are acting on your own risk.
http://www.kb2ljj.com/data/icom/ic-706-MKII.htm (14 di 30)23/08/2009 23.05.07