Installing memory module
1. Insert the memory module into the connector until snaps in.
2. Connect the battery cable to the connector on the system board.
3. Install the
base
cover.
4. Follow the procedures in
Heat sink
Removing heat sink assembly
Heat sink assembly comprises of heat sink and the system fan.
1. Follow the procedure in
2. Remove the :
a.
base cover
b.
battery
3. To remove the heat sink assembly:
NOTE:
To identify the number of screws, see
a. Disconnect the fan cable from the system board [1].
NOTE:
After removing the heat sink assembly, ensure to disconnect the fan cable.
22
Disassembly and reassembly
After working inside your
Before working inside your
computer.
computer.
.screw
list.