Cleaning And Maintenance; Cleaning; Storage; Disposal And Protection Of The Environment - Parkside PWSA 12-LI A1 Translation Of The Original Instructions

GB MT
Scrubbing wheels:
Never use a cutting wheel for
scrubbing !
Exert only moderate pressure on the workpie-
ce. Move the device evenly back and forth.
A working angle of 30° to 40° achieves
the best results for scrub grinding.
Cleaning and
maintenance
Contact our Service Centre about
repairs and servicing not described
in this manual. Only use OEM
parts. Risk of injury!
Turn off the appliance and, before
doing any servicing, remove the
battery.
The following cleaning and servicing
should be done regularly. This will ensure
a long and reliable service life.
Always check the device before using it for
obvious deficiencies such as loose, worn
or damaged parts, correct the positioning
of screws or other parts. Examine the
grinding disc in particular. Exchange the
damaged parts.

Cleaning

Do not use any cleaning agent or
solvent. Chemical substances can
etch the plastic parts of the device.
Never clean the device under run-
ning water.
• Thoroughly clean the device after every
use.
96
• Clean the ventilation openings and the
surface of the device with a soft brush
or cloth.

Storage

• Store the appliance in a dry place well
out of reach of children.
• During storage, avoid extreme cold
or heat so the battery does not lose
power.
• Remove the battery before storing the
unit for longer periods of time
• Grinding discs must be dry and stored
upright and should never be stacked.
Disposal and protection
of the environment
Remove the battery from the device and take
the device, battery, accessories and packag-
ing for environmentally friendly recycling.
Machines do not belong with do-
mestic waste.
Do not dispose of batteries in house-
hold waste, fire (risk of explosion) or
water. Damaged batteries may dam-
age the environment and your health
if toxic fumes or liquids leak out.
• Return the unit to a recycling centre. The
plastics and metals in the unit can be
sorted and appropriately recycled. Ask
our Service Centre for details.
• Dispose of batteries in discharged condi-
tion. We recommend covering the pole
with adhesive tape to prevent a short
circuit. Do not open up the battery.
• Dispose of batteries in accordance with
the local regulations. Take batteries to
an old battery collection point where