Paytel P6 Series Mechanical Integration Manual page 7

Front Cover
Copyright © 2018 PAYTER
BV. All rights reserved. No
part of this document may be
reproduced in any form by
print, photo print, microfilm,
electronic copy or any other
means without written
permission by Payter BV.
Installation option 2:
In case the vending machine comes with pre-installed studs the mounting frame is not required.
An additional cover plate can be ordered for a clean finish of the front.
The cover plate is secured with double sided adhesive for a strong connection.
Fig. 21 Terminal with cover plate
Vending Machine
P66
P6X Mechanical Integration Guide
Page 7 / 21