Dimensions & Mounting; Device Opening - Paytel P6 Series Mechanical Integration Manual

Copyright © 2018 PAYTER
BV. All rights reserved. No
part of this document may be
reproduced in any form by
print, photo print, microfilm,
electronic copy or any other
means without written
permission by Payter BV.
1. Dimensions & Mounting
The majority of the Vending Machines have a provision for installing Payment Terminals.
The dimensions of the P6X Terminal series are based upon the EVA (European Vending
Association) standard.

Device opening

Mounting a P6X terminal series requires a device opening that complies to the EVA EPS –
Standard door model measurements (Fig. 19).
Fig. 19 – Dimensions of opening and weld studs(mm)
All Dimensions [mm] +/- 0.5mm
If no weld studs are available an optional mounting frame, with weld studs, can be ordered. Drill
mounting holes of 4 mm on the same positions as the indicated weld studs to allow mounting of
the frame.
P6X Mechanical Integration Guide
Page 5 / 21