Page 1
P6X Mechanical Integration Guide Document version : 1.0 Document status : Release Date : 30-01-2017 Document ID : PTR-40-10-ML-C-0004-01 NOTICE This manual contains intellectual property, including but not limited, to trade secrets and know-how, operating procedure and production procedures that belong solely to Payter B.V.
Page 3
P6X Mechanical Integration Guide Abbreviation list Abbreviation Description Third Generation (mobile communication system) Coffee Credit Interface Direct Current DHCP Dynamic Host Control Protocol Domain Name Server EDGE Enhanced Data for GSM (Global System for Mobile communication) Evolution Europay Mastercard Visa European Vending Association GPRS General Packet Radio Service (mobile communication system)
P6X Mechanical Integration Guide Dimensions & Mounting The majority of the Vending Machines have a provision for installing Payment Terminals. The dimensions of the P6X Terminal series are based upon the EVA (European Vending Association) standard. Device opening Mounting a P6X terminal series requires a device opening that complies to the EVA EPS – Standard door model measurements (Fig.
P6X Mechanical Integration Guide Mounting options Installation option 1: In case no weld studs are provided as indicated in Fig 19, Payter can provide a mounting frame which can be secured through 4mm mounting holes, located at the indicated weld stud positions. EVA Front Mounting Set Section View Fig.
Page 7
P6X Mechanical Integration Guide Installation option 2: In case the vending machine comes with pre-installed studs the mounting frame is not required. An additional cover plate can be ordered for a clean finish of the front. The cover plate is secured with double sided adhesive for a strong connection. Fig.
P6X Mechanical Integration Guide Installation P66 Split P66S is identical to the P66 terminal with the exception that the card reader and the communication is split into two parts. The card reader can be mounted on top of any machine, while the communication unit is located inside the machine.
P6X Mechanical Integration Guide Troubleshooting Result Codes Result Codes Description 00 - 199 Terminal Internal errors 500 - 799 “ 200 - 299 Network infrastructure related errors 300 - 399 Transaction related errors 400 - 499 Contactless interface related issues Table 18 - Result code categories.
Page 15
P6X Mechanical Integration Guide This error range covers transaction related errors 1. Perform network trouble shooting 2. Try reloading the terminal configuration files Transaction host error, this fault code indicates a specific issue that occurred while the Host was processing a transaction.
P6X Mechanical Integration Guide LAN troubleshooting When a network connection cannot be established, perform the following checks: Solution No Network Check the LAN cable is connected properly, on the terminal connector the connection orange and the green LEDs should indicate link-up and activity. If not double check if the cable is connected properly in the terminal and the patch outlet.
P6X Mechanical Integration Guide Mobile Internet troubleshooting Solution Verify whether the data SIM card is placed. ‘….’ Icon Blinking If the data SIM card has a PIN code, set it up in the terminal, or remove the (No GSM signal) PIN.
P6X Mechanical Integration Guide Warnings AC Adapter • Use only power adapters that come with the terminal. • Do not use the adapter if the cord becomes damaged. • Do not disassemble the AC adapter. Only qualified technicians may service the adapter.