Important Notes - OFA dynamics Elbow Support Fitting Instructions Manual

Important notes

Elbow support
Dear user,
We are pleased that you have chosen a
product from Ofa Bamberg and would like
to thank you for putting your trust in us.
Please take a moment to read through this
product information carefully to ensure
optimum effectiveness of your Dynamics
product.
Ofa Bamberg wishes you a speedy
recovery!
←
Fitting instructions
The fi tting instructions in pictures can be found
on the fold-over page at the beginning of the
brochure.
1
Pull the support over the arm at the stitched end so
that the longitudinal seam runs over the elbow.
2
The support is sitting correctly if you can feel the bone
prominence at the inside and outside of the elbow in
the recesses of the silicone padding.
The Dynamics elbow support relieves
the elbow joint as a result of its compres-
sive effect. Integrated silicone pads relieve
the tendons on the outside of the elbow by
means of gentle pressure. The anatomical fi t
and the pressure-reduced edges make the
support comfortable to wear.
Please note
– The initial adjustment and strapping on of the
product must be carried out by qualified specialist
staff.
– Wear the product directly on your skin. If it has to
be worn in combination with other products, then
please discuss this in advance with your doctor.
– During long periods of rest (e. g. when sleeping) the
product should be removed.
– If you experience an unpleasant sensation, intense
pain or any other problem when wearing the
product, then remove it and contact your doctor or
specialist supplier.
– We use a comprehensive quality management sys-
tem to check our products. However, should there
still be reasons for complaint, please contact your
specialist supplier.