Table of Contents
Advertisement
1.4
ESD Precautions
Always
observe
the
precautions before installing a system component:
1.
Do not remove a component from its anti-static packaging until
you are ready to install it.
2.
Wear a wrist grounding strap before handling electronic
components.
Wrist grounding straps are available at most
electronic component stores.
Do not attempt the procedures described in
the following sections unless you are a
qualified technician.
1.5
Pre-installation Instructions
Always observe the following before you install a system component:
1.
Turn off the system power and all the peripherals connected to
the unit before opening it.
2.
Open the system according to the instructions in the housing
installation manual.
3.
Follow the ESD precautions in section 1.4 before handling a
system component.
4.
Remove any expansion boards or peripherals that block access
to the SIMM sockets or CPU socket.
5.
See the following sections for specific instructions on the
component you wish to install.
1-8
following
electrostatic
discharge
(ESD)
User's Guide
- Quick Links:
- System Board
- Board Layout
Hide quick links:
Advertisement
Table of Contents
