Acer AcerPower 6200 User Manual page 21

Figure 1-9 Installing a PCI Card
5. Turn on the system. The PnP BIOS automatically configures the
PnP ISA and PCI cards with the remaining free IRQs.
1.9.3 Installing a SCSI/LAN Card
Before you proceed, make sure that you have
already installed the non-PnP ISA cards and
have assigned the appropriate IRQs to the
cards.
To take full advantage of the board's SCSI and network functions, you
need to install a SCSI/LAN combo card. To install, follow these steps:
1. Turn off the system.
2. Locate the SCSI/LAN card slot on the system board.
3. Align the golden fingers of the SCSI/LAN card to the slot.
4. Press the card until it is properly seated.
System Board 1-21