Panasonic TH-86SQE1W Operating Instructions (Functional Manual) page 25

SNMP settings
Display Name
Reset
Note: For detailed information on the options of this menu refer to the Connectivity section.
Power off and on is needed to activate the new setting if they are not activated.
Signage Menu Content
Device Info
Display ID
Serial ID Function
Software
upgrade
Serial number
Model name
Save model
information
Display Life Time
Controls
OSD Orientation
Pixel Shift
English - 24 -
Sets the various items for SNMP. SNMP (Simple Network Management Protocol) is a protocol
to manage devices connected to the network.
If the SNMP manager is used for connection, the information of the target device can be
obtained, and its settings can be changed.
[Snmp Username]:
Enter the user name of SNMP v3.
[Permission]:
Select whether to obtain only information via SNMP v3 or to both obtain information and
make the setting.
[Security Level]:
Select the security level for SNMP v3.
[Authentication Protocol]:
Select the authentication method for SNMP v3 from SHA1 and MD5.
[Authentication Password]:
Set the authentication password of SNMP v3.
[Privacy Protocol]:
Select the encryption method for SNMP v3 from AES and DES.
[Privacy Password]:
Set the encryption password of SNMP v3.
The name of the Display that is shown on the network can be changed.
Resets the Network settings to factory default settings.
Sets the device ID. You can select a value between 0-99 using the numeric buttons
on the remote in order to identify your Display.
Set to control external control with the PC connected to SERIAL terminal according to
the Display's ID number.
Displays current software version. Press ENTER to see the upgrade options. You
can use these options to start a manual search for software updates and set your
automatic scan preference.
Displays serial number of the unit. (Cannot changed by user)
Displays model name of the unit. (Cannot changed by user)
Copies the model information data of the unit to a connected USB device.
Displays the duration of life of the unit
Sets the OSD (On Screen Display) rotation of your Display. Landscape, Portrait 1
and Portrait 2 options are available.
Note: CQE1 is not applicable for portrait installation A portrait installation may cause
a defect.
Automatically shifts the display image to prevent image retention on the liquid crystal
panel.Setting this to [On] moves the screen position at certain intervals and displays
the images.