File Management Tips; Using Thinkpad Stack Assistant - Lenovo ThinkPad Stack Mobile Projector Tips

step 1 to restore it to the factory-default settings.
- If the problem persists, disconnect the projector from power. Insert a needle or a
straightened paper clip into the reset hole in the bottom of the projector. Press and
hold the needle or clip for one second and then release it to reset the projector to
the factory-default settings.

To copy or move the pictures from the projector, use the file explorer instead of the gallery
function provided by the projector's built-in system. If you use the gallery function, you can
copy or move only one picture at a time.

When you open multiple web pages with the projector's built-in web browser, do not stack or
remove any ThinkPad Stack series product, and do not plug or unplug the ac power adapter.
If you do so, the web pages might switch between each other. In this case, manually use the
projector touch pad to tap or click the page you want.

You can use the ThinkPad Stack Assistant app to cast and play the videos on your phone
through the projector. For optimal experience, it is recommended that you use a 5 GHz
wireless network connection.

After you synchronize phone files to the hard disk drive (HDD) or USB key through the
ThinkPad Stack Assistant app, it is recommended that you wait sometimes before safely
removing the HDD or USB key.
ThinkPad Stack 智能魔方投影模块使用提示
1. 推荐的堆叠顺序：
注:
 移动硬盘只能堆叠在投影仪下面。
 在所有模块堆叠使用时，建议接入联想 65W 便携旅行电源适配器。
2. 音频输出提示：