Table Of Contents - Benchmark Green Storage WB Series Installation & Maintenance Instructions Manual

Green Storage WB Range
Installation & Maintenance Instructions
CONTENTS
3 Your cylinder and its components
3 Preparing to install the cylinder
4 - 7 Installation instructions
8 Product specification details
9 Product diagrams, connections & measurements
10 - 11 Fiche Data & Parts List
12 - 13 Fitting with Greenstar system boilers with optional internal
diverter valves
13 - 17 Schematic wiring diagrams
18 Commissioning and decommissioning
19 Servicing instructions and fault-finding
20 Information for homeowners
21 Benchmark Commissioning Checklist
22 Service record
23 - 24 Guarantee and product registration
INTRODUCTION
These cylinders are manufactured to the highest specification standards with superior
product engineering, materials and stringent production processes, to deliver the
highest quality products.
When installed and maintained in accordance with this manual, the cylinders will
reliably store and generate hot water for years to come. The manual details how to
prepare, install, commission, service and decommission the cylinders. It covers both
indirect and solar models with an external thermal expansion vessel. A separate insert
sheet contains specific technical details for your chosen hot water cylinder.
As well as comprehensive instructions for installers, the manual provides guidance and
guarantee information for homeowners.
WORCESTER BOSCH CONTACT INFORMATION
TECHNICAL SUPPORT:
CONTROLS & CONNECTIVITY TEAM:
APPOINTMENTS:
SPARES:
LITERATURE:
TRAINING:
SALES:
2
0330 123 3366
0330 123 3641
0330 123 9339
0330 123 9779
0330 123 9119
0330 123 0166
0330 123 9669
THE BENCHMARK CODE
DEMONSTRATING COMPLIANCE, REASSURING
HOMEOWNERS
Benchmark places responsibilities on both the manufacturer and installer. The purpose
is to ensure that customers are provided with the correct equipment for their needs,
that the equipment is installed, commissioned and serviced in accordance with the
manufacturer's instructions by competent persons and that it meets the requirements
of the appropriate Building Regulations. The Benchmark Checklist can be used to
demonstrate compliance with Building Regulations and should be provided to the
customer for future reference.
Installers are required to carry out installation, commissioning and servicing work in
accordance with the Benchmark Code of Practice which is available from the Heating
and Hotwater Industry Council who manage and promote the Scheme.
Visit www.centralheating.co.uk for more information.
We are a Charter Members of the Hot Water Association and undertake to meet the
requirements of the Charter Scheme: To supply fit for purpose products clearly and honestly
described. To supply products that meet or exceed appropriate standards and building and
water regulations. To provide pre- and post-technical support.
To provide a clear and concise warranty details to customers. For further details on the Charter,
please visit www.hotwater.org.uk/hwa-charter
IMPORTANT NOTE TO THE INSTALLER
Read these instructions before commencing installation. Unvented cylinders are a
controlled service as defined in the latest edition of the building regulations and
should only be fitted by a competent person.
You must ensure the installation complies with the current Building Regulations and or
Technical Standards Documents for England, Scotland, Wales, N Ireland or Ireland.
After installation the Benchmark Commissioning Checklist on page 21 must be
completed and left, with these instructions, with the householder for future reference.
IMPORTANT NOTE TO THE HOMEOWNER
Please ensure that the installer has fully completed the Benchmark Commissioning Checklist
on page 21 of this installation manual. You will need this information should you need to
make a claim against your product guarantee in the future.
This product requires servicing every 12 months and the Service Record must be maintained
to protect your 25-year guarantee.
Please note all images are for illustrative purposes only and specific products will vary for
each product line.