Specifications; Installation - JUKI PLN-985 Instruction Manual

SPECIFICATIONS

Type of sewing ma-
Post-bed, 1-needle, Needle-Feed Lockstitch Machine Needle (standard)
chine head
Usage Leathers, such as shows, etc.
Sewing speed 2,500 sti/min (max.)
Stitch length 4 mm (max.)
Lift of presser foot Hand lifter : 6.5 mm, Knee lifter : 9mm
Thread take-up lever Slide type thread take-up lever
Needle bar stroke 33.4 mm
- Equivalent continuous emission sound pressure level (L
Noise A-weighted value of 78.5 dB; (Includes K
sti/min.

. 1.. INSTALLATION

1) Mounting locations for the knee lifter and the oil pan
(Caution).Be.sure.to.install.the.knee.lifter.
before.installing.the.motor.
2) Attaching the support rubbers
3
2
1
3) Carry the sewing machine with two persons.
(Caution).Do.not.hold.the.handwheel.
4) Do not put protruding articles such as the screwdriver and the like at the location where the sewing machine is placed.
Needle system
Thread
Stitch adjuster
method
Lubrication method Hand oiling and oil tank drop lubrication
Motor to be used
Oil to be used
) at the workstation:
pA
= 2.5 dB); according to ISO 10821- C.6.2 -ISO 11204 GR2 at 2,500
pA
Knee.lifter.
Oil.pan
support
Fix the support rubbers 1 on the four corners of the table using
nails 2 .
Adhere felts 3 with adhesive glue on support rubbers 1 .
– 1 –
SCHMETS 134, Nm100
Nm100 to Nm130
#40 to #8
Dial type
Clutch motor (2P) 3 phase 400W
JUKI New Defrix Oil No.1
24mm
196mm
61mm
73mm