JUKI PLN-985 Instruction Manual page 8

BEForE oPEratIoN
cautIoN :
Check the following so as to prevent maloperation of and damage to the machine.
• Before you put the machine into operation for the first time after the set-up, clean it thoroughly .
remove all dust gathering during transportation and oil it well.
• Confirm that voltage has been correctly set.
Confirm that the power plug has been properly connected to the power supply.
• Never use the machine in the state where the voltage type is different from the designated one.
• The direction of normal rotation of the machine is counterclockwise as observed from the pul-
ley side.
Take care not to allow the machine to rotate in the reverse direction.
• When tilting the machine head, tilt it after removing knee lifter hook.
• Never operate the machine before lubricating.
• For a test run, remove the bobbin and the needle thread.
• For the first month, decrease the sewing speed and run the sewing machine at a speed of 1,500
sti/min or less.
• operate the handwheel after the machine has totally stopped.
vi