Installing.the.thread.stand - JUKI PLN-985 Instruction Manual

5) Attaching the hinge arm
4
5
6) Installation of the machine

. 2.. INSTALLING.THE.THREAD.STAND

6
7
1
– 2 –
Install hinge arms to the front and rear (at one location each) of
4
the sewing machine head with screws
hinge arms .
4
(When hooking hinge seats
6
sunk plane of the hinge seats
Put the sewing machine head on the table with the sewing machine
head and hinge seats aligned.
6
Fix hinge seats with wood screws
6
Assemble the thread stand, set it up on the machine table using the
installation hole in the table and tighten nut 1 gently.
. Hook hinge seats
5
on the hinge arms , face the counter
4
upward.
6
supplied with the unit.
7
on
6