Get To Know Your Heater; Operating Instructions - Uberhaus PH-891 Operator's Manual

A
A. Cool-Touch cabinet
B. Power Button
C. Decrease temperature button
D. Increase temperature button
1. Plug the power supply cord into a grounded wall outlet. (110/120VAC, 60Hz)
2. TURNING THE HEATER ON: To turn the heater ON, press the Power button
Then press the MODE button
set to HIGH . Press the MODE button
a fourth time to set the heater OFF.
3. TURNING THE HEATER to Standby OFF: To turn the heater to Standby OFF, press Standby OFF button.
The heater will shut off but the fan will continue to run until all the heat has been expelled. The heater will turn
off automatically and is set to Standby mode. Press the Standby ON button to turn ON the heater again. If you
are not going to use the heater for a long time. Press Power button
power LED will turn off.
4. SETTING THE THERMOSTAT
Press the MODE button
5. SETTING THE TEMPERATURE
To set the desired temperature:
Press the button once until the numeric temperature starts flashing.
Press the button again to increase the temperature or the

GET TO KNOW YOUR HEATER

B
G
Product Features

OPERATING INSTRUCTIONS

. The heat setting will be set to AUTO, Press the MODE button
and set to AUTO mode to engage the automatic thermostat.
F
TM
D
C
E. Mode Button
F. LED Temperature Display
G. Standby ON/OFF button
a third time to set to LOW
5
E
, the power LED will turn on.
, Press the MODE button
to fully shut down the heater. The
button to decrease the temperature.
again to