Automatic Power-Off; Warning Indicators; Cleaning And Maintenance - Fakir MASSFIT User Manual

EN
NOTE !
When the parameters are entered, if no button is pressed for 6 seconds, the data on the
screen will be saved to the related user automatically; the user is automatically defined
as the LCD shows 0.0. If you want to change, follow the instructions.
2. Measurement
1.Press SET Button to turn on the scale. The user memory will flash on the screen.
2.Select your user number (P0 - P9) by using the up and down buttons.
3.The saved personal data is shown on the screen in sequence and flashes. Wait until you
see "0.0" on the screen.
4. Step on the scale barefoot and stand still. Place your feet on the electrodes.
5. Your weight will be displayed first. The screen will show the weight, body fat, water,
muscle, bone weight, calories and BMI (body mass index) in sequence. The measured
rates will be shown three times in sequence.
NOTE !
If your have questions regarding your health, consult your physician.

Automatic Power-off

When you get off the bascule's glass platform, your weight will be cleared after about 5
seconds on the appliance screen and the it will automatically turn off.

Warning Indicators

: Overload Indicator. (The device max. weight capacity is 180kg.)
: Low battery Indicator. In this case, replace the battery in your device.
: Re-measure warning. An error occurred.

Cleaning and Maintenance

• Read the safety instructions carefully during the cleaning process.
• Wait until the appliance switches off automatically.
• Use a dry, clean cloth when cleaning the outside of the appliance.
34