Fakir MASSFIT User Manual page 33

Insert a battery in the device
Place the appliance on
a flat ground.
B. Fat, Water, Muscle, Bone, Calorie Measurement
1. Entering Parameters
You may enter and save the parameters for up to 10 users. Therefore you can measure
the body fat, water, muscle and bone rate, weight and the calories. The measurements are
completed by taking your height, weight, age and gender as reference.
Define the user by the instructions below.
Device Off
Select the height by
pressing SET button. After
it is set, the next selection
(age) will flash.
Use the arrow buttons to enter
the age of the user.
Step on the
platform
When the numbers flash, your
weight is stabilized.
Press SET
button.
To select the user, use up-
down buttons; you can define
up to 10 users (P0-P9). Input
the desired user number.
Use the arrow buttons
to enter the height of the user.
Select the age by pressing SET
button. After it is set the screen
will show 0.0 and the setup
process is completed.
Select the user number by
pressing SET button. After
it is set, the next selection
(gender) will flash.
33
EN
Your weight will
will appear.
By pressing
arrow buttons, select
one of male-female
symbols.
Select the gender by pressing
SET button. After it is set, the
next selection (height) will flash.