Clutch Disc/Plate Removal
1. Drain the engine oil (page 63).
2. Remove the six clutch cover bolts (1) and
clutch cover (2).
(1)
(1) clutch cover bolts
(2) clutch cover
3. Remove the six clutch spring bolts and springs
(3).
Loosen the bolts in a crisscross pattern in two or
three progressive steps.
4. Remove the clutch pressure plate (4).
(3)
(3) clutch spring bolts and springs
(4) clutch pressure plate
5. Remove the clutch lifter (5).
(2)
(5) clutch lifter
6. Check the operation of the thrust bearing (6)
built in clutch lifter with your finger. The
bearing should turn smoothly and quietly.
(6) thrust bearing
(4)
If the operation is not smooth, refer to an official
Honda Service Manual (page 186) for bearing
disassembly or see your dealer.
7. Remove the seven clutch discs, six clutch
plates, judder spring and spring seat (7).
(5)
(7) clutch discs, clutch plates, judder spring and spring
seat
(6)
Clutch System
(7)
75
Servicing Your Honda