Honda CRF450RX 2020 Owner's Manual & Competition Handbook page 64

5. Apply small amount of engine oil to a new
O-ring (12).
Install a new O-ring to the fuel pump base (13).
6. Install the fuel pump unit holder assembly (14)
into the fuel pump base while aligning its
hooks (15) with the grooves (16) in the fuel
pump base tabs (17).
If the gap between the hooks and tabs is more
than 0.04 in (1.0 mm), replace the fuel pump
unit.
Be sure that the hooks are completely seated.
(15)
(16) (17)
(12)
(12) O-ring (new)
(13) fuel pump base
(14) fuel pump unit holder assembly
(15) hooks
(16) grooves
(17) tabs
7. Connect the fuel pump yellow (18) and green
(19) wire terminals to the fuel pump base
terminals (20). Push the wire terminals until
they stop as shown.
Be careful not to damage the wires.
(19)
(14)
(18) yellow wire terminal
(19) green wire terminal
(20) fuel pump base terminals
8. Install a new dust seal (21) by aligning its tabs
(22) with the fuel pump unit grooves (23).
Check the dust seal lug (24) which is located the
(13)
index mark (25) of the fuel pump base (13).
(22) (23)
(16) (17)
(13)
(21)
(24)
(13) fuel pump base
(21) dust seal (new)
(22) tabs
(18)
(18)
(19)
(20)
(20)
(24)
(25)
(23) grooves
(24) dust seal lug
(25) index mark
Fuel System (CRF450R/RWE)
9. Apply small amount of engine oil to a new
O-ring (26).
Install a new O-ring into the between the collar
A (27) and collar B (28) of the fuel pump unit
(29).
(29)
(26)
(26) O-ring (new) (28) collar B
(27) collar A (29) fuel pump unit
10. Install the fuel pump unit (29) into the fuel tank
(30) with its hose joint facing forward.
Be careful not to damage the fuel pump unit.
(30)
(29) fuel pump unit
(30) fuel tank
Servicing Your Honda
(27)
(28)
(29)
(cont'd)
59