Table of Contents
Advertisement
5019_102_00273_INSTAL_GB
Service specifications - single models
WATER CONNECTION
Recommended COLD (Maximum 60°C).
3/4 " BSP (GB20) to suit flat washer.
WATER SOFTENER MODELS
Refer to your
WATER PRESSURE
Water Softener Models
Other Models
DRAIN CONNECTION
Drain Hose Joiner to suit Ø19mm ± 2mm waste tee.
ELECTRICAL CONNECTION
220-240 VAC power outlet
4.5Amps Minimum.
Prefinsished model shown
*For an Integrated the product depth is specified with an 18mm Integrated Panel thickness.
** Depth of product excludes Curvature (30mm), or Handle.
LENGTH OF SERVICES (FROM PRODUCT EXIT POINT)
Drain hose - 2250mm
Inlet hose - 1750mm
Power supply cord - 1965mm
NOTE: Services approximately exit product 189mm from left; 550mm from front; 393mm from top.
30-05-2007
13:25
User Guide on vhow to set up your water softener.
R
Maximum
1000kPa (145 p.s.i.)
1000kPa (145 p.s.i.)
Tabs
Side View
Pagina 11
Minimum
100kPa (14,5 p.s.i.)
30kPa (4,3 p.s.i.)
*
Drawer Open
11
Advertisement
Table of Contents
