Table of Contents
Advertisement
Chapter 3 • Using the Projection Panel
The Graphical
User Interface
3–8 • User's Guide
Your projection system features a graphical user interface that
allows easy control of menus and your panel's many functions.
You will find that each interface method discussed below provides
you with increasing power over your presentation system.
Control Panel and Remote Control
Menu selections can be easily made with the Control Panel or the
Remote Control.
1. Press the MENU key to display the on-screen menus.
2. Press the Up and Down arrow keys to select the desired menu.
When a menu is selected, the currently active settings are
highlighted.
3. Use the Left and Right arrow keys to move across the menus to
the setting to be changed.
4. Use the Up and Down arrow keys to change the selected value.
5. Press the MENU key again to close the menus. Settings are
automatically saved when the menus are exited or the
projection panel is turned off.
Controlling Menus with a Mouse
If a Microsoft-compatible mouse is connected to the projection
panel's SERIAL port, menu selections are even easier. When the
menus are open, simply point at a desired selection and click to
select or change it.
Advertisement
Table of Contents
