Table of Contents
Advertisement
Chapter 2 • Setting Up the Projection Panel
2–12 • User's Guide
Mono AUDIO IN
Even if your audio source only outputs monaural audio, your
panel can output simulated stereo.
1. Choose the appropriate cable, and insert the appropriate
connector in your source's AUDIO OUT port.
2. Connect the other end to the projection panel's left or right
AUDIO IN port.
3. Make the required adjustments in the Audio menu
(see page 3-19).
Audio Follow
Your projection panel features Audio Follow capability. This
feature allows you to attach two video sources and the
accompanying audio to the projection system at the same time.
1. Connect monaural audio from your computer to the
projection system's left AUDIO IN port.
2. Connect monaural audio from your VCR or laser-disc to the
projection system's right AUDIO IN port.
3. Make the required adjustments in the AUDIO menu
(see page 3-19).
As you toggle between your sources, the audio follows the
associated video. You always get simulated stereo output.
Advertisement
Table of Contents
