Table of Contents
Advertisement
Chapter 3 • Using the Projection Panel
Using
the Menus
3–10 • User's Guide
When the MENU key is pressed or when Cyclops is used to open
the menus (see page 3-9), a menu bar appears at the top of the
screen.
MENUS
LightBoard
Cyclops
Input Source
Image
Preferences
Advanced
Figure 24
Main Menu
The menu displays only those items that are relevant to
Note:
the selected input source (computer, video, and S-VHS). The
menus shown in the following illustrations are the full menus.
Menu
LightBoard
Highlight text or other objects on the screen using
this built-in draw tool with Cyclops or a mouse.
Functions include:
• Overlay: Allows the user to draw or annotate
over the displayed image.
• WhiteBoard: Clears the screen and provides
bright background for the Draw tool.
• BlackBoard: Clears screen and provides dark
background for Draw tool.
Cyclops
Set up and calibrate the Cyclops Interactive Pointer
System.
Input Source
Select a video source.
Image
Adjust the settings of an incoming video signal.
Audio
Control the audio volume and balance.
Preferences
Program a custom key on the Remote Control,
select the option for rear projection, or change the
language of the menu displays.
Advanced
Set up separate custom settings for 2 users for
each video mode.
Press the MENU key again or use Cyclops (see page 3-9) to turn
the Menu off.
Calibrate
No Calibrate
Calibrate
Audio
Actions
Button
Left
Right
Center
None
Advertisement
Table of Contents
