OHAUS STARTER 3100C Instruction Manual page 6

Find Quality Products Online at:
EN-4
Controls
Button
- Start or endpoint measurement
- Confirm setting, store entered
value
- Start calibration
- Meter turn on
- Return to measurement screen
- Store current reading to memory
- Increase value during setting
- Scroll up through the memory
- Switch between pH and mV
measuring modes
- Decrease value during setting
- Scroll down through the memory
- Start self-diagnosis
GlobalTestSupply
www.
STARTER 3100C Bench Conductivity Meter
Press & release Press & hold
for 3 seconds
- Turn auto endpoint on / off
,
- Review the latest calibration
data (cell constant)
- Meter turn off
- Recall stored data
- Print current memory data
- Enter setup mode
Turn on/off the backlight of the
LCD
.com
sales@GlobalTestSupply.com