Table of Contents
Advertisement
USER GUIDE
The whole image appears to be unstable or misplaced
Adjust the WIDTH and TUNE settings (instability), or the image
position settings (misalignment).
Check that you are using a source with compatible resolution.
The projector may be connected to a source with a non-standard
computer (or video card). Adjust the frequency and position of the
image.
Cooling fan is not working
If the fan does not work the projector must not be used and should
be returned to your dealer for repair.
The remote control is not working
The red LED on the remote control should flash when transmitting. If
not, check batteries.
Make sure you point the remote control at the projection screen or
directly at the IR-receivers.
The front red LED indicator flashes when receiving signals from the
remote (see illustration below).
The maximum range of the IR-transmitters is 15m (50 feet) - Are you
standing close enough?
If the effective range of the transmitters is significantly reduced, the
remote control needs new batteries.
Front IR-receiver
with red red LED indicator
XGA LCD PROJECTOR
30
Rear IR-receiver
Advertisement
Table of Contents
