Table of Contents
Advertisement
USER GUIDE
3.
SOUND.
Connect sound using an optional 3.5 mm stereo jack cable.
4.
MOUSE.
You may control the mouse directly from the wireless remote control.
COMPUTER 1 MOUSE is active when you use COMPUTER 1, and
COMPUTER 2 USB MOUSE is active when you use COMPUTER 2.
COMPUTER 1
AUDIO IN
COMPUTER 1 MOUSE
Connect the appropriate adapter to the free end of the mouse cable
at the computer end as described below.
SERIAL (RS 232). Use the serial adapter with a branch for the
local computer mouse. The serial adapter is fitted with a 9-pin
DSUB connector. Use an extra 9- to 25-pin adapter (available
from your dealer) if your computer has a 25-pin serial
connector. Connect your computer mouse to the free branch of
the adapter if desired. With some computers, the branched
adapter may not work. For this purpose, an optional straight
serial adapter is available.
PS/2. Use the PS/2 adapter that connects directly to your
computer mouse port. Running the computer mouse in parallel
is not possible, unless your computer itself has provision for two
mice simultaneously. You may consider using the above serial
adapter and run your mouse on the serial port instead, in order
to be able to run your local mouse in parallel. This will require a
different mouse driver setting. Please consult your computer
documentation or local dealer for details.
MAC. Use the optional MAC mouse adapter to connect to the
mouse port on your MAC computer.
COMPUTER 2 USB MOUSE
USB. Connect the USB cable directly to the USB port on the
projector and the computer.
MONITOR
COMPUTER 2
Connector panel
14
XGA LCD PROJECTOR
COMPUTER 2
COMPUTER 1
USB MOUSE REMOTE
MOUSE
AUDIO OUT
VIDEO
AUDIO IN
S-VIDEO
VIDEO
Advertisement
Table of Contents
