Table of Contents
Advertisement
USER GUIDE
8.1.1
REMOTE CONTROL KEYS
The following table describes each key in detail. Some functions are
memorized, while other functions are only momentary.
The MEM column indicates whether the function setting is memorized.
ON/OFF
VOLUME
POWER
BLACK
MUTE
SOURCE
LASER
MENU
TRACKBALL The trackball is mainly used to control the
RIGHT
LEFT/
SELECT
Switches the remote control on/off.
Volume of the audio output can be altered to
suit local conditions.
Turns the projector into on or standby mode.
Switches the projection lamp off, but leaves
power on to the rest of the projector.
Applies suspension of the display of images.
The black curtain can be moved up and down
using the trackball.
Switches the sound on/off.
Selects between COMPUTER 1, COMPUTER 2,
S-VIDEO AND VIDEO as the active source.
Activates the laser pointer.
Invokes the menu system.
mouse pointer (if the mouse cable is attached
properly). When BLACK, MAGNIFY or MENU is
invoked, mouse control is disabled, as the
trackball is used to control these functions
instead. Mouse sensitivity is set at your
computer as with the standard mouse.
Emulates the right mouse key.
Emulates the left mouse key.
Once the menu is accessed selections are
confirmed using SELECT.
XGA LCD PROJECTOR
19
MEM
Advertisement
Table of Contents
