Making The Connections - Ask Proxima Impression A10+ User Manual

USER GUIDE

6 MAKING THE CONNECTIONS

The projector may be connected to different equipment. The following
sections describe in detail how to connect to these systems.
See the illustration on the rear of the quick set-up card on how the various
system parts connect together.
Be aware of static electricity that may build up in the dry season and when
operating on synthetic carpets. Discharge any static electricity by touching a
metallic surface before you start.
Various cables are supplied or optionally available to connect to different
sources. Follow the list below in numerical order for a trouble-free set-up!
1. SWITCH OFF all equipment before making all the connections.
2. COMPUTER CABLE.
Connection to the projector is made through a basic computer cable and
appropriate adapters.
PC. Use the computer cable directly to connect to the graphics
port. If needed, connect your monitor to the MONITOR connector
on the projector.
MAC. Connect the optional MAC adapter marked COMPUTER on
the computer end to adapt to the graphics-port. The optional
adapter marked MONITOR is connected to the monitor cable if
needed.
XGA LCD PROJECTOR
13