Advertisement
PRODUCT:
*APW Wyott reserves the right to modify specifications or discontinue models without incurring obligation.
APW Wyott Foodservice Equipment Company · 729 Third Ave., Dallas, TX 75226
(800) 527-2100 · (214) 421-7366 · Fax (214) 565-0976 · www.apwwyott.com· info@apwwyott.com
QUANTITY:
Insulated Rectangular
Bottom Mount Hot Food Wells
Models:
FW-2026
ITEM #:
PRODUCT SPECIFICATIONS
Construction:
Well is constructed of welded 304 stainless steel,
with 28 ga., fully insulated aluminized steel outer
housing. Units shipped with drain are provided
with stainless steel 1/2" NPT drain welded to
bottom of pan provided with removable screen.
Unit is heated by a tubular calrod heat element
shaped in serpentine fashion for even heat
distribution to pan base. Element is mounted
under well and secured by aluminized reflector
shield for maximum efficiency. 1 1/2" thick
compressed fiberglass insulation.
13/16"flange
Recommended flange turndown 3/4"
Thermostatic control has 36" capillary
(effective length 26")
Electrical Specifications:
208/240V, 1200/1600W, 5.7/6.6 Amps
Overall Dimensions:
Outside:
8-3/16"H x 28" W x 21-3/4" D
(20.8cm x 71.1cm x 55.2cm)
Inside:
4"H x 26" W x 20" D
(10.1cm x 66cm x 50.8cm)
Cutout:
20.25" W x 26.5" L
(52.39cm x 68.26cm)
Control size:
6-1/4" W x 6-7/8"H
Control cutout:
5-3/4" W x 6-1/4" H
Shipping Information:
46 lbs. (21 kg)
F.O.B. / Dallas, TX 75226
FW-2026D ("D" designates drain)
Rev. 6/10/2005
# 1410
Advertisement
