APW Wyott FDD-18 Specifications

PRODUCT:
Designed Smart
Maximum Overhead Heat for Warming Areas
• New Dual Overhead design features unique heat reflection
system that disburses heat consistently over a wider area.
• High watt versions have 15% more power than competitive
models.
Easy to Install & Customize to Current Systems
• All dual units come standard with sturdy stainless steel
mounting brackets.
• A wide option of lengths and mounting accessories let
you customize the dual overhead warming system that
is perfect for your operation. (Stands to hold up to 24").
• Tubular post mount stand (up to 42").
• Chain suspension
• Extra electrical conduit knockout locations allow flexibility
in installations.
• Available with either an infinite or toggle control that can
be supplied within the unit or in a "remote" control box.
(remote is recommended). Installer provides wiring
between "remote" control box and unit. (remote is
recommended).
Easy to Use
• Pilot lights are standard features that keep your
employees aware of the unit's operations.
Built Solid
Most Durable Overhead Warmer in the Industry!
• Stainless Steel Construction resists corrosion, is easy to
clean, and presents an attractive appearance.
• Control components are insulated in a ventilated box
construction for increases reliability and longevity.
• APW Wyott overhead warming equpiment is backed by
a 2-year warranty on heating elements and a 1-year
parts and labor warranty.
• Certified by the following agencies:
APW Wyott Foodservice Equipment Company · 729 Third Ave., Dallas, TX 75226
(800) 527-2100 · (214) 421-7366 · Fax (214) 565-0976 · www.apwwyott.com· info@apwwyott.com
QUANTITY:
Standard Calrod
Double Overhead Warmers
ITEM #:
FDD SERIES OVERHEAD WARMERS
Overhead Warmer Accessories
Remote control Box Pilot light switch box,
(shown below)* control and cover with
single, dual, or triple
controls
*(two necessary for a dual)
Tubular Stand Kit 1 pr. legs for permanent
(#76180) mounting (requires two
pairs of legs for duals)
*Recommended for 24"
or smaller
Cord & Plug Set For portability, includes
(#75906) adapter bushing. For
120V units, 48" and less.
Chain Supports For overhead suspension 1 lb. (.5 kg)
(#75901) without flush mount
(requires double the
length vs. singles)
Remote Control Box
See reverse side for product specifications.
Models: FDD FDDL
1 lb. (.5 kg)
5 lbs. (2.3 kg)
7 lbs. (3 kg)
Rev. 2/10/2006