Spray Techniques - WilTec 62567 Operation Manual

Spray Techniques

Always aim at the lower boarder of a line, in order to create overlapping lines.

Spray Nozzle Cleaning
It may occur that the nozzle of the spray gun gets obstructed by paint in the process of application.
Abide by the following instructions, in order to successfully clean the nozzle.
Turn turn the device off and lock the spray gun trigger by using the release lock.

Set the nozzle to cleaning position.

© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Hold the spray gun straight and move the arm at a constant

speed while keeping a distance of approximately 30 cm to
the surface.
Do not diversify the motion of the spray gun and avoid erratic

motions, since this will lead to an uneven aplication of paint.
Artikel 62567 Seite 19
09 2020-1