Initial Use; Unpacking; Accessories; Before Use - Parkside Performance PWSAP 20-Li A1 Operation And Safety Notes

If the supply cord is damaged,
¢
it must be replaced by the
manufacturer, its service agent
or similarly qualified persons
in order to avoid a hazard.
Protect the electrical parts
¢
against moisture. Do not
immerse such parts in water
or other liquids to avoid
electrical shock. Never hold the
appliance under running water.
Pay attention to the instructions
provided for cleaning,
maintenance and repair.
The appliance is suitable for
¢
indoor use only.
This appliance is only designed
¢
for charging the battery pack
type: Parkside Performance
20 V battery.
CAUTION! RISK OF EXPLOSION
Never charge non-rechargeable
batteries! Protect the battery against
heat, e. g., against continuous intense
sunlight, fire, water and moisture.
Danger of explosion.

Initial use

Q

Unpacking

Q
WARNING!
The product and the packaging are not
u
children's toys! Children must not play with
plastic bags, sheets and small parts! There is
a danger of choking and suffocation!
30 GB / IE
1. Unpack all parts and lay them on a flat,
stable surface.
2. Remove all packing materials and shipping
devices if applicable.
3. Make sure the delivery contents are complete
and free of any damage. If you find that
parts are missing or show damage do not
use the product but contact your dealer. Do
not use the product unless missing parts have
been delivered in addition or defective parts
have been replaced. Using an incomplete
or damaged product represents a hazard to
people and property.
4. Ensure that you have all the accessories and
tools needed for assembly and operation.
This also includes suitable personal protective
equipment.

Accessories

Q
To operate this product safely and correctly, the
following accessories, i. e. tools and attachments,
are necessary:
Grinding disc
o
Wire brush
o
Accessories and tools are available through your
authorised dealer. When buying always consider
the technical requirements of this product
(see "Technical data").
If you are not certain, ask a qualified specialist and
get advice from your trusted dealer.
NOTE
This instruction manual contains information
u
and suggestions for several attachments and
their uses. The attachments mentioned are
not necessarily included in the shipment, but
are meant to indicate additional possibilities
for using this product.

Before use

Q
Attaching / removing the
Q
battery pack
Attaching the battery pack:
1. Align the battery pack
slide it onto it. Ensure it clicks noticeably in
place.
to the handle and
4