Technical Data; Safety Warnings; General Power Tool Safety Warnings - Parkside Performance PWSAP 20-Li A1 Operation And Safety Notes

Technical data

Q
Cordless angle
grinder:
Rated voltage:
Rated speed n:
Rated capacity:
Disc thickness:
Spindle thread:
Weight (incl.
accessories):
Battery pack:
Type:
Rated voltage:
Capacity:
Number of cells:
Rapid battery
charger:
INPUT:
Rated voltage and
frequency:
Power consumption:
OUTPUT:
Rated voltage:
Charging current:
Charging time:
Protection class:
Noise emission value:
Noise measurement value determined in
accordance with EN 60745. The A-rated noise
level of the product is typically as follows:
Sound pressure level L
pA
Uncertainty K :
pA
Sound power level L : 79.7 dB(A)
WA
Uncertainty K :
WA
Vibration values:
Total vibration values (vector total of three
directions) determined in accordance with
EN 60745:
(main handle)
Hand/arm
vibration a :
h,AG
24 GB / IE
PWSAP 20-Li A1
20 V
10000 min
-1
Ø 125 mm
max. 6 mm
M14
2.66 kg
PWSAP 20-Li A1-1
Lithium ion
20 V max.
5 Ah
10
PWSAP 20-Li A1-2
100 – 240 V ~ ,
50 – 60 Hz
95 W
14.4 – 20 V
4 A
approx. 90 min
II /
: 68.7 dB(A)
3 dB
3 dB
4.37 s
2
m/
(auxiliary handle)
Hand/arm
vibration a :
h,AG
Uncertainty K:
The values apply for the work mode surface
grinding. Other applications may have different
vibration emission values
WARNING!
Wear ear protection!
WARNING!
The vibration level varies in accordance with
u
the use of the power tool and may be higher
than the value specified in these instructions in
some cases. There is a risk of underestimation
of the vibration load if the power tool is
used regularly in this manner. Try to keep the
vibration loads as low as possible. Measures
to reduce the vibration load are, e.g. wearing
gloves and limiting the working time. Wherein
all states of operation must be included (e.g.
times when the power tool is switched off and
times where the power tool is switched on but
running without load).
NOTE
The vibration level specified in these
u
instructions has been measured in
accordance with a standardised measuring
procedure specified in EN 60745 and can
be used to make equipment comparisons.
The specified vibration emission value can
also be used to make an initial exposure
estimate.

Safety warnings

General power tool safety
Q
warnings
WARNING!
Read all safety warnings and all
u
instructions. Failure to follow the warnings
and instructions may result in electric shock,
fire and/or serious injury.
5.23 s
2
m/
1.5 m/s
2