Data Download - ALK CoPilot CoPilot 3.0 User Manual

Data Download

Specifying a Location
Pocket CoPilot gives you 3 options for downloading data: 1) directly to the
device's memory, 2) to a Storage Card in the device, or 3) to a Storage Card through a
Storage Card Reader. You will be prompted to enter this information before you
are able to download. Pocket CoPilot detects which options are available.
NOTE: If there is data stored on the device's memory, and on a
Storage Card in the device, Pocket CoPilot will use the Storage Card
by default. To have it use the device's memory you must remove the
Storage Card.
1. To install to Pocket PC
Device Memory (In this
example, Pocket CoPilot has
detected that there is no Storage
Card in the device.) Click
Next to go to the Data Selection
window.
2. To install to a Storage Card
in the device (In this example,
Pocket CoPilot has detected that
all options are available.) Click
Next to go to the Data Selection
window.
-9-
NOTE: You can also download to a Storage Card through a PCMCIA
adapter. You would simply identify the associated drive letter under
the Storage Card Reader option.
3. To install to a Storage Card
through a Card Reader (again,
all options are available.)
3a.You will be asked to specify
the drive letter associated with
your Storage Card Reader.
Click Next to go to the Data
Selection window.
-10-