Adding A Data Region - ALK CoPilot Live User Manual

Adding a Data Region

If you have purchased an additional data region after your initial purchase of CoPilot, you
will need to modify the original ("Base") installation and activate the new region.
IMPORTANT: You can only use your Expansion Product Key AFTER you have installed
CoPilot with a Base Installation Product Key. If you have not yet installed CoPilot, please
do so first and then follow the instructions below. The Base Installation Product Key can be
found on the printed Quick Start Guide that comes with CoPilot.
1. Insert your CoPilot Install Disc into your CD-
ROM drive.
2. Select Modify and click Next when the
InstallShield Wizard appears.
3. Enter your Expansion Product Key when
prompted to enter a Product Key.
4. Follow the on-screen instructions.
5. The Activation Wizard will appear at the end of
installation. Activation occurs just as it did when
you originally installed CoPilot.
- 7 -