Table of Contents
Advertisement
6. You will return to the Data
Selection Menu where you can
either select another data area,
or Download a selection to your
Pocket PC.
7. Once you have chosen to
download, using the arrows in
the center of the box, move the
data areas that you would like to
include in, or remove from, the
download you are about to
execute. You may also remove
data areas from the memory
by clicking Delete. Click
Download to send the data
to your Pocket PC.
-19-
Starting Pocket CoPilot -
Guidance Mode
In Pocket CoPilot's Guidance Mode you will receive turn-by-turn route
guidance information as you travel. For your safety the Driver Safety screen will
hide maps when they are not necessary to avoid distractions. Using the Passenger
screen the map will be visible in half of the screen at all times.
First turn on your Pocket PC and make sure that the GPS receiver is
attached and powered.
PLEASE NOTE: You will only need to enter your initial
city the first time you use Pocket CoPilot. For subse-
quent uses, Pocket CoPilot will remember your last
location automatically.
1. To launch the Pocket CoPilot program,
click on Start and choose "Pocket
CoPilot" from the drop-down menu.
Because you have the GPS receiver
attached and powered, Pocket CoPilot
assumes that you are on the road ready to
drive, and opens in Guidance Mode to get
you on your way quickly and easily.
2. The first time you use Pocket CoPilot,
you will be asked to enter your current
location to help speed up the initial GPS
acquisition. Enter your city, state
(e.g. new york, ny) and click OK.
-20-
Advertisement
Table of Contents
