Advertisement
Quick Links
Operation Manual
ARTICLE 51278, 51279, 51748 and 51749
Spindle Press
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ
insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities please contact us.
© by WilTec Wildanger Technik GmbH
Seite 10
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Advertisement
Related Manuals for WilTec 51278
Summary of Contents for WilTec 51278
- Page 1 Operation Manual ARTICLE 51278, 51279, 51748 and 51749 Spindle Press Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.
- Page 2 The information contained in this document is subject to change without prior notice. No part of this document can be copied or duplicated in another form without the prior written consent of WilTec Wildanger Technik GmbH. The WilTec Wildanger Technik GmbH assumes no liability for any errors in this user manual or the connection diagram.
- Page 3 Before processing, clean the fruit thoroughly with drinking water so that no dirt gets into the mash. The fruit press is not designed for industrial use. © by WilTec Wildanger Technik GmbH Seite 12 http://www.WilTec.de http://www.aoyue.eu...
- Page 4 It is important that fruit is prepared before pressing. • Apples must be crushed, not mashed. Mixers are not suitable. • Grapes and berries must be carefully chopped to break up the skin. © by WilTec Wildanger Technik GmbH Seite 13 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de...
- Page 5 Please never leave the press plate on top of the chopped fruit as this can cause the wood to warp. © by WilTec Wildanger Technik GmbH Seite 14 http://www.WilTec.de http://www.aoyue.eu...
- Page 6 Store the press in a dry place, the press plate turned up above the height of the press container. Description Fruit Press Stand Stainless Steel Basket Frame Press Plate Frame T-Grip Hexagon Nut M12 Washer Wing Screw M12 Screw M8x20 Hexagon Nut © by WilTec Wildanger Technik GmbH Seite 15 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de...
- Page 7 Description Fruit Press Sstand Press Basket Frame Press Plate Metal Cap Frame T-Grip Screw M12 Washer Wing Nut Screw M8x20 Screw M8 Screws © by WilTec Wildanger Technik GmbH Seite 16 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de...
- Page 8 All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.