Renault EASY CONNECT Instructions Manual page 78

LISTENING TO THE RADIO
"Region"
The frequency of an "FM" radio station
may change depending on the geo-
graphical area. Activate this function
to continue listening to the same radio
station whilst changing region. The
audio system will automatically track
frequency changes without interruption.
When "Region" mode is off, if the signal
level drops, the radio will switch to a
new frequency operating as a relay for
the station you were listening to previ-
ously.
Note:
– stations in the same area sometimes
broadcast different programmes or
use different radio station names.
– some radios broadcast on regional
frequencies. In this case:
– with "Region" activated: the system
will not switch to the transmitter for
the new region, but the system will
switch normally between the trans-
mitters of the initial region;
3.6
(5/5)
– With "Region" disabled: the system
will switch to the transmitter for the
new region, even if the broadcast
programme is different.
TA/I-Traffic
(traffic information)
When this function is activated, your
audio system enables traffic bulletins
to be received (depending on the coun-
try) if they are broadcast on certain FM
radio stations.
You must then select the frequency of
the station that is transmitting traffic in-
formation. If another source is playing
(USB, Bluetooth), it will be automati-
cally interrupted whenever traffic infor-
mation is received.
Sound environment settings
From the settings, you can activate or
deactivate the following elements:
– "Natural";
– "Live";
– "Club";
– "Lounge";
– ...
Note: the list of equaliser modes may
vary according to the equipment.
"Sound settings"
From this menu, you can set the follow-
ing:
– "Bass boost": use this function to
boost/reduce the bass sound.
– "Bass / Medium / Treble": use this
function to boost/reduce the bass,
medium or treble sounds.
– Speed-dependent volume control:
when this function is activated, the
volume of the audio system varies in
accordance with the vehicle speed.
You can adjust its sensitivity or dis-
able it;
– ...
For further information on the available
settings, see the section on "Settings".
For safety reasons, carry
out these operations when
the vehicle is stationary.