Weinmann & Schanz Bellavista 90 847 89 User Instruction Manual page 30

TURNING ON FOR THE FIRST TIME
After inserting the batteries, set the day of the week and
time.
GB
Adjust the day of the week by using the "+"
and "-" keys (1=MON, 2=TUE,...7=SUN), then
confirm by pressing the "Mode" selection key.
The hour starts flashing. In the same way, ad-
just the hour by using the "+" and "-" keys and
confirm with "Mode" selection key.
Repeat the same procedure for the minutes.
ON/STANDBy MODE
In "Standby" mode the current time and the day
of the week appear on the display.
All the operating modes are suspended ("Pilot
Wire" included), but the appliance is powered
and waiting for command reception.
To turn the appliance on or off, press the "Stand-
by" key.
The towel warmer turns on in the previously se-
lected operating mode and emits a beep.
When first using the remote after replacing the
batteries, the "Comfort" mode is selected.
The entry into "Standby" mode is signalled by
means of a double beep, the exit from "Stand-
by" mode by means of a long beep.
IMPORTANT: After having pressed the "Standby" but-
ton on the control panel, the appliance ignores all orders
transmitted by the remote control other than "Standby" and
emits a beep to indicate the error.
Compared to the control panel, the remote control
offers the possibility to only activate certain oper-
ating modes and functions.
OPERATING MODES
The appliance provides 5 operating modes
which allow the user to heat the environment
in the most suitable way with respect to his
needs.
Press the "Mode" selection key to select the
desired operating mode. An icon on the LCD
will show the selected operating mode.
Pilot Wire
Night/Eco
Chrono
CHRONO
In "Chrono" mode, you can select one of the three preset
chrono-thermostat programs or the custom program. The
latter lets you set various temperatures ("Comfort" and
"Night/Eco") over a 24 hour period for each day of the week.
CHOICE OF PROGRAM
Press the "Mode" key until the icon
played. Then press the "Mode" and "-" keys to-
gether and hold them both down for at least
3 seconds.
The program code (P1, P2, P3 and P4) flashes.
Press the "+" and "-" keys to set the program.
Press the "Mode" key to confirm.
PROGRAM P1
FROM MONDAY TO FRIDAY
SATURDAY AND SUNDAY
PROGRAM P2
FROM MONDAY TO SUNDAY
PROGRAM P3
FROM MONDAY TO FRIDAY
SATURDAY AND SUNDAY
PROGRAM P4 - CUSTOM
28
Comfort
Anti-Freeze
is dis-
HOURS MODE
0 - 6 Night/Eco
6 - 9 Comfort
9 - 16 Night/Eco
16 - 23 Comfort
23 - 0 Night/Eco
0 - 7 Night/Eco
7 - 23 Comfort
23 - 0 Night/Eco
HOURS MODE
0 - 7 Night/Eco
7 - 23 Comfort
23 - 0 Night/Eco
HOURS MODE
0 - 6 Night/Eco
6 - 9 Comfort
9 - 13 Night/Eco
13 - 23 Comfort
23 - 0 Night/Eco
0 - 7 Night/Eco
7 - 23 Comfort
23 - 0 Night/Eco