Renkforce VisualTable RF-4730964 User Manual page 15

5) Writing on images
①
Writing Start
- Click the pen button, and you can write and draw on the current viewing image.
- The functions not available on the writing mode become disabled.
- A click on the pen button again enables you to drag the mouse and use it as a move tool for the
current viewing image.
- Writing Stop: Press L
* In the writing mode, Brightness and Contrast controls change into Color and Line Width Selections.
②
Using tools on Writing Mode
- Click the pen, and the Color Selection and Line Width menu appears, where you can select colors
and line widths and write or draw objects on the screen with the electronic pen or the mouse by
moving it with its left button pressed.
- Click Figures and select your desired one to draw it.
- Click the Eraser button to select the normal eraser, and you can erase the line where it comes
in contact; otherwise, you may choose the complete eraser to erase all contents.
- Click on Open Image to retrieve new image, on which you can do writing and drawing.
- Drag a specific area with a mouse to make selection, and you may be able to use such functions
as 'Cut' , 'Save'
program tool" for more detail.)
or R to exit the writing mode.
, 'Copy' , etc. in the Area selection. (Refer to III. "4. Using the
- 15 -
III_Operating VisualTable
Writing mode
Scroll
/ Exit Writing mode